This Bundle Includes:

• 2 x Equinox UFO Multi-Beam Moving Head Lighting Effects
• 1 x 2m DMX Cable

Twin Multi-Beam Moving Head Lighting Bundle

This Equinox UFO Twin Pack combines two powerful multi-beam moving heads with the DMX cable required to connect them. Operating the fixtures together creates a wider and more impressive aerial display, with a total of twelve narrow RGBW beams sweeping around the venue.

Each Equinox UFO contains six 40W quad-colour LEDs, producing red, green, blue and white light through an extremely narrow 2° beam angle. Movement from the base, arm and continuously rotating circular head creates distinctive aerial patterns that appear to rise, fall and hover above the dancefloor.

The twin bundle is ideal for mobile DJs, clubs, entertainment venues, live events and stage productions requiring a symmetrical or wider-reaching lighting effect. Using suitable haze will make the twelve individual beams and their movement much more visible.

Synchronised Primary and Secondary Operation

The included 2m DMX cable can be used to connect the two fixtures in primary and secondary mode. One Equinox UFO runs the built-in programme while the second follows, producing a coordinated light show without requiring a separate DMX controller.

Automatic and sound-activated programmes provide quick operation for mobile DJs and venues. Sound mode responds to the music, allowing both fixtures to generate coordinated movement and colour effects in time with the show.

Independent DMX Control

Each Equinox UFO can also be controlled through 16-channel DMX. This provides access to movement, colour, dimming, strobe and effect functions, allowing both fixtures to be programmed as part of a larger lighting show.

The fixtures can share the same DMX address for matched operation or be assigned different addresses for independent control. A suitable DMX controller and an additional cable between the controller and the first fixture will be required for programmed DMX operation.

Multi-Directional Movement and RGBW Output

Each fixture provides 540° base pan, 270° tilt and continuous 360° head rotation. Combining two units greatly increases the number of possible beam positions and movement patterns across the room.

Variable strobe, full-range electronic dimming and selectable dimming curves provide further control over the visual character of the show. The 20kHz LED refresh rate also helps minimise visible flicker when the fixtures are used around cameras.

Professional Installation

Each Equinox UFO includes a quick-release omega clamp. Suitable truss clamps and secondary safety cables are also required when the fixtures are installed overhead.

PowerTwist input and output connections support power linking with suitable cables, while three-pin XLR DMX connections are provided for data linking. Power-linking cables, truss clamps and safety cables are not included in this bundle.

Key Features

• Complete twin moving head effect bundle
• Two Equinox UFO multi-beam moving heads
• One 2m DMX cable included
• Twelve 40W RGBW beams across the complete bundle
• Six 40W quad-colour RGBW LEDs per fixture
• Narrow 2° beam angle
• 20kHz LED refresh rate
• Automatic, sound-activated, manual and primary/secondary modes
• Primary/secondary linking for synchronised light shows
• 16-channel DMX control per fixture
• Fixtures can be addressed together or controlled independently
• 16-bit pan and tilt positioning
• 540° base pan per fixture
• 270° tilt per fixture
• Continuous 360° head rotation
• 0 to 100% electronic dimming
• Linear, square law, inverse square law and S-curve dimming options
• LED and halogen-style dimming profiles
• Variable electronic strobe
• Four-button menu with 2-inch LCD display
• Three-pin XLR DMX input and output
• PowerTwist power input and output
• Fan-cooled operation
• Quick-release omega clamp included with each fixture
• Power supply per fixture: 100 to 240V AC, 50/60Hz
• Power consumption per fixture: 195W
• Dimensions per fixture (H x W x D): 335 x 295 x 208mm
• Weight per fixture: 5.9kg

Frequently Asked Questions

Q: What is included with the Equinox UFO Twin Pack?
A: The bundle contains two Equinox UFO multi-beam moving head effects and one 2m DMX cable. It does not include a DMX controller, truss clamps or safety cables.

Q: Can the two Equinox UFO fixtures run a synchronised light show?
A: Yes. Connect the fixtures using the included DMX cable and set them to primary and secondary mode. The secondary fixture will follow the built-in show running on the primary unit.

Q: Is a DMX controller required?
A: No. Both fixtures can run together using their automatic, sound-activated or primary/secondary modes. A DMX controller is only needed when you want to create and operate a custom programmed show.

Q: Can the two lights be controlled independently?
A: Yes. Assign each fixture a different DMX address and control them from a suitable 16-channel DMX controller. An additional DMX cable will be needed to connect the controller to the first fixture.

Q: How many beams does the complete bundle produce?
A: Each Equinox UFO produces six beams, giving a total of twelve narrow RGBW beams across the two fixtures.

Q: Is haze required?
A: No, but suitable haze will make the individual beams and aerial movement far more visible. Always confirm that haze is permitted at the venue.

Q: Are mounting clamps included?
A: Each fixture includes a quick-release omega clamp. Suitable truss clamps and secondary safety cables are required separately for overhead installation.

Q: Can the fixtures be used outdoors?
A: No. The Equinox UFO is designed for indoor use and must be protected from rain, moisture and liquids.